SH020

DMC Crusher

The smallest of the Mini Shears range the SH020 is suitable for machines weighing between 1.5 and 3.0 tonne. Tough durable construction the SH020 model can cut a variety of materials including, but not only pipe, I-beams, plate, wire, rebar and concrete. Replaceable upper and lower jaw wear parts for easy maintenance. Perfect accessory for all mini excavators.

  • WEIGHT: 190 kg
  • JAW OPENING D: 200 mm
  • TOTAL WIDTH B: 478 mm
  • TOTAL LENGTH A: 1085 mm
  • TOTAL HEIGHT C: 290 mm
  • PRESSURE(CYLINDER): 210 bar
  • OIL FLOW (CYLINDER): 20-45 lpm
  • FORCE AT THROAT: 65 ton
  • FORCE AT MID: 34 ton
  • FORCE AT FRONT: 22 ton
  • JAW MATERIAL: Hardox500
  • ROTATING: 360 free rotating
  • EXCAVATOR: 1.5~3.0 ton
TECH SHEET

SH030

DMC Crusher

The SH030 is suitable for machines weighing between 2.5 and 5.0 tonnes. Perfect for those small demolition, scrap, waste or recycling jobs. Light and durable with replaceable upper and lower jaw wear parts the SH030 is low in maintenance and high in functionality. This little dynamo makes light of any work with its 26 tonne of force.

  • WEIGHT: 260 kg
  • JAW OPENING D: 230 mm
  • TOTAL WIDTH B: 563 mm
  • TOTAL LENGTH A: 1200 mm
  • TOTAL HEIGHT C: 350 mm
  • PRESSURE(CYLINDER): 210 bar
  • OIL FLOW (CYLINDER): 30-75 lpm
  • FORCE AT THROAT: 111 ton
  • FORCE AT MID: 47 ton
  • FORCE AT FRONT: 26 ton
  • JAW MATERIAL: Hardox500
  • ROTATING: 360 free rotating
  • EXCAVATOR: 2.5~5.0 ton
TECH SHEET

SH050

DMC Crusher

The largest of the mini excavator shear range and suitable for machines weighing between 4.5 and 8.0 tonne the SH050 is for medium demolition, scrap, waste or recycling jobs. With a closing force of 33 tonne at the front and 152 tonne at the back this unit makes light of the job at hand. Replaceable upper and lower jaw wear parts available.

  • WEIGHT: 430 kg
  • JAW OPENING D: 290 mm
  • TOTAL WIDTH B: 720 mm
  • TOTAL LENGTH A: 1410 mm
  • TOTAL HEIGHT C: 400 mm
  • PRESSURE(CYLINDER): 210 bar
  • OIL FLOW (CYLINDER): 40-80 lpm
  • FORCE AT THROAT: 152 ton
  • FORCE AT MID: 60 ton
  • FORCE AT FRONT: 33 ton
  • JAW MATERIAL: Hardox500
  • ROTATING: 360 free rotating
  • EXCAVATOR: 4.5~8.0 ton
TECH SHEET

SH050H

DMC Crusher

The SH050H is a hydraulically driven set of shears suitable for machines weighing 4.5 – 8.0 tonne. With capabilities of rotating 360 degrees from the bi-directional piping the SH050H are high strength and wear resistant unit perfect for demolition, scrap, waste or recycling jobs where access is limited to a smaller machine.

  • WEIGHT: 500 kg
  • JAW OPENING D: 290 mm
  • TOTAL WIDTH B: 665 mm
  • TOTAL LENGTH A: 1456 mm
  • TOTAL HEIGHT C: 465 mm
  • PRESSURE(CYLINDER): 210 bar
  • OIL FLOW (CYLINDER): 40~80 lpm
  • PRESSURE(ROTATING): 120 bar
  • OIL FLOW(ROTATING): 20-50 lpm
  • FORCE AT THROAT: 152 ton
  • FORCE AT MID: 60 ton
  • FORCE AT FRONT: 33 ton
  • JAW MATERIAL: HARDOX500
  • ROTATING: 360 hydraulic rotating
  • EXCAVATOR: 4.5~8.0 ton
TECH SHEET